Some important things to consider before connecting to the network: Check your division's website for those procedures and charts for the aerodrome. Your first connection as an Air Traffic Controller on the IVAO network requires a basic understanding of the procedures employed at the place you will control. You can find the manual of IvAc in your IvAc installation folder to find answers to your questions and explore the capabilities of the program. When you have successfully connected, you will receive a welcome message in the MSG tab of IvAc's COMMBox, and the CONNECT button will now read DISCON. Once all of the above details are entered, press the Connect button. Voice: Select on to have IvAc connect you to a TeamSpeak server automatically.It is for scheduled training sessions only! For best performance, use the one auto selected. Server Address: The server you are connecting to.Password: The IVAN password you were assigned when you joined IVAO.VID: Your IVAO VID that was assigned to you when you joined.Real Name: Your full name that you registered with IVAO.We suggest you use your division abbreviation followed by your initials, for example: ZA_MR_OBS. At this time, you will connect as an Observer, so the callsign can be anything, but must end with “_OBS”. Use the chance to listen in on active ATC frequencies and learn!Įnter the details in the connection window: This will help you to make yourself familiar with the software and IVAO while avoiding trouble with pilots who will contact you for a clearance sooner or later. Your first connections should be as an Observer, without actual ATC duties. Load IvAc and open the desired sector file, as described in the step above. You have no duties, that means you are not in charge of any traffic yet. As an Observer, you are free to watch the traffic fly around and you may listen to active ATC. We will now connect you as an Observer at your favourite airport. You could then be transmitting over the channel without realising it. Avoid using the “Voice Activation” method as this opens your microphone whenever noise is picked up so background noise and even your breathing, may set it off. Now, every time you want to transmit to a pilot on the frequency, you must first press the push to talk key, speak and then let go of the push to talk key. Here you can see that Mouse btn 2 (mouse scroll wheel) has been selected as the push to talk key. You should select the “Push to talk” method and select a key by pressing “Set”. Open Settings → Sound Input/Output Settings. Once you have installed and have run Teamspeak, there are some settings you must change. Important: IVAO is only compatible with TeamSpeak Version 2! Should you have TeamSepak 3 installed already, install our version, too. Teamspeak is included in the IvAc download package, and will be installed automatically during the installation of IvAc. Text communication is permitted but voice is preferred. We use the TeamSpeak 2 program for voice communication.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |